OS-Base For Husqvarna Norden 901- Use with OS Bags 6/12/18 Litres

Overlander Base Husqvarna Norden 901 by Kriega

Designed to be a perfect fit on the HUSQVARNA NORDEN 901 with a custom shape and specific fitting hardware. The OS-BASE 901 is an 'over the seat harness' for mounting OS-6, OS-12, or OS-18 ADVENTURE PACKS as soft panniers, with no need for metal frames. (Bags can be selected via the drop down menu on the top right)

This system provides a super-tough, lightweight carrying solution, with no drilling or permanent bodywork alterations needed. The fitting hardware gives the flexibility to mount a one, two, or three-pack set-up, depending on your ride. The set-length straps make mounting quick and easy, and the custom shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount and just seconds to remove it.

Features

• Carrying capacity from 12 to 54 Litres with centre pack mounting option
• Heavy-duty Hypalon construction
• Quick and easy to put on / take off
• Re-inforced stitching on all stree points
• Aircraft grade alloy hooks
• Non-slip cam buckles
• Includes pre-cut paintwork protection
• 10 Years Warranty
• Weight: 1150 g

Fitting

1. Loop the lower straps through the foot peg mounts
2. Loop the top straps around teh baggage carrier alloy spacers
3. Tighten the top straps and the OS-Base is firmly mounted to the seat

Disclaimer:

Even though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. We strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on your motorcycle.